Troubleshooting Bluetooth connection:
Make sure your phone is not connected to another bluetooth device and the blue tooth is on.
To enter Bluetooth mode - from the off position click and hold the button till it turns on and the green indicator light is on.
To reset your light and put it into search mode, from the off position enter bluetooth mode by clicking and holding the unit until the green indicator light turns on. Now click and hold for 5-7 seconds to reset and enter the Bluetooth compatibility mode.
Your Light Has Arrived but Wont Charge?
Your light most likely had a piece has slid down - don't worry there is a simple fix
Watch this short Video: https://youtu.be/JWRW1n_x06E
How to Operate:
ON: To turn on click the button once.
OFF: To turn off the unit click the button once.
CHANGE COLORS: To change colors or settings, while the unit is on click the button twice quickly.
CHANGE BRIGHTNESS: To change the brightness of the setting, once on click the button and hold.
BLUETOOTH: To enter Bluetooth mode - from the off position click and hold the button till it turns on and the green indicator light is on.
RESET BLUETOOTH/COMPATIBILITY MODE: To reset your Bluetooth and put it into search mode, from the off position enter blue tooth mode by clicking and holding the unit the green indicator light turns on. Now click and hold for 5-7 seconds to reset and enter the Bluetooth compatibility mode.
Connecting to the App:
Once downloaded follow the prompts until you reach the main screen and click add device:
From There navigate towards lighting:
Click lighting (Bluetooth)
Make sure your light is in Bluetooth mode (from off position click and hold the button)
Click Confirm light has flashed
Allow up to 1 minute for your app to find the Bluetooth signal.
(If you are having trouble connecting to your light while you light is in Bluetooth mode click and hold the light for another 7 seconds and it will reset and go into compatibility mode)
Once your light pops up click add device and name your light whatever you like.
Creating Smart Scene:
Navigate towards the scene tab and click on a scene.
Click Edit on the top right corner.
From this menu, you can create scenes or effects with different colors that clash at various speeds.
Making Groups with your lights:
In the top right corner click button once you are on the control screen.
From their select create group
You can have any combination of lights in the group that you please.
To charge the unscrew the waterproof cap at the end of the unit. Use the provided charging cable and adapter to begin charging. Charging takes between 4-6 hours depending on the input.
Do not use the 1/4inch hole for mounting the unit it is strictly for mini-tripod standing.
Do not put into water unless the endcap is tightly screwed on.
Do not leave charging past max charge capabilities it will diminish the battery life.
Do not take the lights deeper than 1.5 meters for longer than 30 minutes.
Do not drop your unit as some parts of the lights are more fragile than others.
Need a replacement?
Fill out this form: https://forms.gle/qKoESA2sDGhodfWB6